Commissioning Alarm Notification - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
4.

5.10 Commissioning Alarm Notification

You can set alarm notification by email or SMS as required. Information about a maximum of
20 users who will receive alarm notification can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:

To implement alarm notification by email, the following conditions must be met:

Procedure
Step 1 Choose System Settings > Event Notification.
Step 2 Set the Outbox Setting parameter.
Figure 5-41 Setting the Outbox Setting parameter
Issue 07 (2020-03-16)
When editing the smart module view, click
of the view.
The ECC800 is configured with a 3G module and supports SIM card access in
2G/3G/4G mode. The 2G card should support the GSM mode, and the 3G/4G card
should support the WCDMA and GSM modes.
The ECC800 is connected to a network with n email server through a WAN port. Both
the Internet and local area network (LAN) are supported.
The ECC800 supports only SMS notification service but not data service by using the 3G module.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Zoom In or Restore to adjust the size
156