Huawei ECC800 User Manual page 43

ECC800 Data Center Controller
User Manual
Indicator
RF_Z
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/COM).
Table 3-25
Table 3-25 LOCK/GND/GATE/COM port pin definitions
Item
LOCK/GND (control
magnetic locks) pin
sequence
GATE/COM (door status)
pin sequence
Issue 07 (2020-03-16)
Color Name
Green Wireless
communication
status indicator
lists the LOCK/GND/GATE/COM port pin definitions.
LOCK
GND
GATE
COM
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Status
 Steady on: No network parameters
exist, or a network is to be created.

Blinking at long intervals: A
network is set up, and no node
access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
 Blinking at super short intervals: A
network is set up, and node access
is allowed (the indicator blinks at
10 Hz, on for 0.05s and then off for
0.05s).
 Blinking intermittently at super
short intervals: The access actuator
is searching for a network (the
indicator blinks at super short
intervals for 0.5s and then turns off
for 0.5s).
Description
12 V_OUT
GND
DI1
COM
34