Huawei ECC800 User Manual page 156

ECC800 Data Center Controller
User Manual
2.
Step 2 For details about how to commission IP cameras and set parameters for them, see the
document delivered or click
1.
2.
3.
Set coding protocol to H.264.
Issue 07 (2020-03-16)
The following lists the requirements of the operating system and browser for logging in to the camera
through the WebUI.
 Support Windows 7: Internet Explorer 8/9/10/11. Chrome 32+, and FireFox 35–51

Support Windows 8: Internet Explorer 10/11, Chrome 32+, and FireFox 35–51
 Support Windows 10: Internet Explorer 11, Chrome 32+, and FireFox 35–51
 Google Chrome 45 or later versions need to install the Internet Explorer tab plug-in.
 Only 32-bit web browsers are supported.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
Choose Settings > Network Configuration > Network Parameters, and set IP
address, Subnet mask, and Gateway IP address for the camera according to the site
plan.
Set camera stream type, primary stream, and secondary stream 1 parameters.
Copyright © Huawei Technologies Co., Ltd.
here to download the document.
5 Power-On Commissioning
147