How Should I Open Doors Remotely Over The Ecc800 Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Table 9-5 Parameter description for adding a device
Path
Monitoring > System >
ECC800 > Running
Parameters > AI/DI_1
Port Settings
NOTE
Step 3 After setting all mandatory parameters, click Submit.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800 WebUI, and drag the device to the corresponding
position in the Smart Module View pane based on the actual device layout.
9.1.24 How Should I Open Doors Remotely over the ECC800
WebUI
Context
If O&M personnel need to enter a smart module but do not take an access cord or forget the
password, you can open the door remotely over the ECC800 WebUI.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Open the aisle door.
Table 9-6 Operations for opening a door remotely
Path
Monitoring > Aisle > Access
Actuator Group > Access
Actuator n > Controls
----End
Issue 07 (2020-03-16)
The setting example
indicates that the device
connects to the AI/DI_1
port on the ECC800. If the
device connects to another
port, enter the number of
the connected port.
Copyright © Huawei Technologies Co., Ltd.
Parameter
AI/DI_1 sensor
AI/DI_1 sensor name
AI/DI_1 sensor type
AI/DI_1 power supply
Setting
Select Remote door opening and click Submit
Setting
Select Enable and click Submit
Enter the device name.
Select the type of the device to be
accessed from the drop-down list
box.
NOTE
For certain devices, the device type can
be automatically identified after the
device is connected.
The default value is Enable.
9 FAQ
205