Huawei ECC800 User Manual page 144

ECC800 Data Center Controller
User Manual
Context
A default IP address has been configured for the VCN500 before delivery. Modify the IP
address based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN500.
1.
2.
3.
4.
Step 2 Enabling camera NTP synchronization.
Issue 07 (2020-03-16)
The version number is subject to the Quick Start delivered with the VCN500. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN500 IP address in the same network segment.
Enter the OMU Portal address (https://192.168.1.100:8443 by default) in the address bar
of the Internet Explorer and press Enter button.
On the login page, enter the user name Admin and preset password Change_Me, and
click Log In to enter the OMU Portal page.
After the first login, change the password in time to ensure account security and prevent unauthorized
network attacks, such as data tampering. Huawei will not be liable for any security issues caused by your
failure to change the preset password in time or password loss after changing.
Choose Local Configuration > Server configuration, and set the service IP address
(VCN500 IP address), NAT IP address, Timezone and Time according to the site
requirements.
Figure 5-15 Configuring the server
 Set Business IP to 192.168.11.110, Subnet mask to 255.255.255.0, Gateway IP to 192.168.11.1.
The values here are examples. The actual values prevail.
 Set NAT IP to VCN500 external IP address, which is the same as the external IP address mapped
from the VCN500 internal IP address displayed on the ECC800.
Configure the NTP synchronization. After setting The NTP clock source server to Yes,
set the IP address of the NTP server.
The server that connects to cameras needs to enable the camera NTP synchronization function. For the
detailed operations, see Step
Copyright © Huawei Technologies Co., Ltd.
2.
5 Power-On Commissioning
135