Creating An Ecc800 On The Neteco - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Table 7-1 IP parameters
Path
System
Settings >
Monitor
Module
IP >
WAN_1
Step 3 Click Submit.
Step 4 Set NetEco communications parameters on the ECC800 WebUI.
Table 7-2 NetEco parameters
Path
System
Settings >
NetEco >
Communication
Parameters
Step 5 Click Submit.
----End

7.1.3 Creating an ECC800 on the NetEco

Prerequisites


Issue 07 (2020-03-16)
Parameter
IP
Subnet mask
Default
gateway
Parameter
Server IP
Port number
Monitoring
IP Address
for Link
Setup
You have logged in to the NetEco client by web browser.
You have created modules or container in Data Center Planning.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
192.168.1.10 Set this parameter based on the IP address
assigned by the network administrator.
255.255.255. Set this parameter based on the subnet mask
0 assigned by the network administrator.
192.168.1.1 Set this parameter based on the default
gateway address assigned by the network
administrator.
Default Setting
Value
192.168.8.1 IP address of the primary NetEco server
1
NOTE
The NetEco IP address and the ECC800 IP
address must be configured in the same
network to ensure normal connection
between the NetEco and the ECC800.
31220 31220
WAN_1 WAN_1
7 Remote Management
171