Faq; Webui Operations; Setting Ecc800 Cascading - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

8.1 WebUI Operations

8.1.1 Setting ECC800 Cascading

If multiple smart modules (≤ 3) are installed in the same room and the customer has not
deployed the NetEco, multiple ECC800s can be cascaded for management. To set the
cascading function, follow the procedure in this section.
Prerequisites
Cascaded ECC800s communicate with each other properly.
Context
A maximum of three ECC800s can be cascaded. After the IP addresses of other smart module
ECC800s in the room are added to an ECC800, their active alarms and PUE data can be
displayed and viewed.
You can click links on the cascading management page of the master ECC800 to display the
login pages of the other ECC800s. Then, you can log in to view the details.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Smart Module Cascading.
Step 3 Click Add. In the displayed New Smart Module Cascading dialog box, enter the IP
addresses of the ECC800s to be cascaded.
Step 4 Click Confirm.
Step 5 Choose Home > Multi-Module Monitoring. The information about the cascaded ECC800s
is displayed.
Issue 05 (2019-09-16) Copyright © Huawei Technologies Co., Ltd.

8 FAQ

8
FAQ
174