Webui Description - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
2.
Step 5 Log in to the ECC800 WebUI.
1.
2.
----End

4.1.2 WebUI Description

For data transmission security, the ECC800 supports WebUI access through SSL.
Issue 07 (2020-03-16)
Add the ECC800 IP address to the list of trusted sites and enable automatic file
downloading. Then set the security level of the trusted site to the lowest.
When switching between different versions of the ECC800 on your PC, you are advised to clear the
historical Internet Explorer cache. Failing to do so may cause some information missed or exception
after login. The following provides the details:
1. Open Internet Explorer and choose Tools > Internet Options > General.
2. Select Delete browsing history on exit and click Delete.
3. In the Delete Browsing History dialog box, select all options except Password, and click Delete.
Enter https://monitoring IP address (such as monitoring IP address
https://192.168.1.10) in the address box of the browser, and then press Enter to enter
the WebUI login page.
Figure 4-2 WebUI login page
On the login page, enter the preset user name admin and preset password Changeme,
set the language, and click Log In.
 After the first login, change the password in time to ensure account security and prevent
unauthorized network attacks, such as data tampering. Huawei will not be liable for any security
issues caused by your failure to change the preset password in time or password loss after changing.
 An account is logged out due to timeout if no operation is performed within 10 minutes after system
login.
 It is recommended that a maximum of three users log in to the ECC WebUI at the same time.
Copyright © Huawei Technologies Co., Ltd.
4 UI Description
78