How To View Real-Time Data - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Step 4 Log in to the app.
1.
2.
3.
----End

9.2.3 How to View Real-time Data

Context
You can use the APP software to view the smart module data center layout, active alarms,
historical alarms, asset details, performance data, operation logs, system parameters, and
version information.
Procedure
Step 1 Log in to the ECC800 mobile phone or pad app as an administrator.
Step 2 To view the smart module data center layout, tap Home.
Step 3 To view active alarms and historical alarms, choose Alarms > Active Alarms or Alarms >
Historical Alarms.
Step 4 To view asset details, choose Asset > Asset Details.
Step 5 To view performance data, choose More > Performance Data.
Step 6 To view operation logs, choose More > Log Management > Operation Log.
Step 7 To view system parameters and version information, choose More > System maintenance >
Network Parameter or More > System maintenance > Version Info.
----End
Issue 07 (2020-03-16)
Start the mobile phone or pad app, choose Settings > Network Connection on the login
screen, select WiFi SSID specified on the WebUI, and enter the value of WiFi
Password specified on the WebUI for login.
On the login screen, choose Settings > Server IP Settings, and ensure that the IP
address is 192.168.245.10.
The user name and login password for the app are the same as those for the ECC800
WebUI. Specify the user name and password, and tap Login.
 It is recommended that you use different user names to log in to both the ECC800 WebUI and app at
the same time. If you use the same user name to log in to the WebUI and app at the same time, either
of them will be forcibly logged out.
 If an exception in network or an unexpected exit from the app occurs, the original user can log in
immediately and the newly-added user need to wait 5 more minutes to log in.
You can only view performance data by exporting them.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
214