Huawei ECC800 User Manual page 67

ECC800 Data Center Controller
User Manual
Figure 3-29 ETH converter
(1) Status indicator
(4) COM2 communications port
Specifications
Table 3-49 ETH converter technical specifications
Item
Power input
RS485 or control area
network (CAN)
BLINK button
E-label
Issue 07 (2020-03-16)
(2) BLINK button
(5) 48 V power port
Specifications

DC input: Terminal, with input voltage of 36–60 V DC
 POE power supply: One POE port, 10/100M
communication rate, complying with IEEE802.3at
Provides two RS485/CAN ports. The default
communications rate for the RS485 port is 9600 bit/s, and
that for the CAN port is 125 kbit/s. Both ports match the
RJ45 terminal shared by RS485 and CAN.
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super
short intervals for 0.5s and then off for 0.5s) for 10
seconds.
Supported
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
(3) COM1 communications port
(6) POE port
58