Access Actuator - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Table 3-22 IC card chip specifications
Item
Chip model
Chip name
Chip type
Operating frequency
Read/write distance
The emergency button or emergency door release button is used to open a door in
emergencies.



3.2.5.1.1 Access Actuator

The access actuator is the control component for the aisle door in a smart module. It connects
to the ECC800 controller over FE port, wireless networking (802.15.4). It opens the magnetic
lock by detecting the card swiping information of the card reader, door open button
information, and fire linkage information. It has access right management, access event record,
and alarm record functions.
Issue 07 (2020-03-16)
If the IC cards used by the access control device need to be purchased, the IC card chip specifications
are as follows.
The emergency button can disconnect the power supply to the lock and therefore unlock
the door in case of emergency.
In case of emergency, break the glass of the emergency door release button to disconnect
the power supply to the lock and therefore unlock the door.
Copyright © Huawei Technologies Co., Ltd.
Specifications
S50
Mifare 1K (S50) card
Philips Mifare 1 IC S50
13.56 MHz
1–3 cm
3 Device Description
31