Skylight Actuator - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Indicator
ALM
RF_Z

3.2.7 Skylight Actuator

The skylight actuator controls the rotating skylight on the aisle containment of the smart
module through the alarm linkage information from the fire extinguishing system or the
control information from the upper computer. The skylight actuator supports E-labels and
wireless networking (802.15.4).
Issue 07 (2020-03-16)
Color Name
Red Alarm
indicator
Green Communicati
on status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s. The
cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is generated.
Steady on No network parameters exist,
or a network is to be created.
Blinking at A network is set up, and no
long intervals node access is allowed (the
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals
blinks at 10 Hz, on for 0.05s
and then off for 0.05s).
Blinking The AC actuator is searching
intermittently for a network (the indicator
at super short blinks at super short intervals
intervals for 0.5s and then turns off for
0.5s).
3 Device Description
43