Huawei ECC800 User Manual page 41

ECC800 Data Center Controller
User Manual
Figure 3-9 Access actuator
(1) 48 V power port
(4) RS485 port COM1
(7) BLINK button
(10) AI/DI_2 dry
contact (Reserved port
for linkage control or
third-party fire
extinguishing system
dry contacts)
Specifications
Table 3-23 Access actuator technical specifications
Item
Power input
POE port
Wireless
communication
AI/DI port
DO output
DI input
RS485 serial port
Issue 07 (2020-03-16)
(2) POE port
(5) Address DIP switch
(8) WG_2 Wiegand
interface
(11) AI/DI_1 dry
contact (Reserved port
for exit button)
Specifications
 DC input: Terminal, with input voltage of 36–60 V DC
 POE input: One POE port that complies with IEEE802.3at.
FE communication, 10/100M communications rate
One wireless communication port that complies with IEEE802.15.4,
mutual backup with FE communication
Two AI/DI ports, can connect to the fire alarm and exit button
One 12 V DC power output that controls magnetic locks, terminal
One DI input port for connecting to the door status switch
Two RS485 ports (one route) with the default communications rate of
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
(3) RS485 port COM2
(6) Status indicator
(9) WG_1 Wiegand interface
(12) LOCK/GND/GATE/COM door
status or magnetic lock port
32