Huawei ECC800 User Manual page 82

ECC800 Data Center Controller
User Manual
Indicator Color
PWR Green
Networking Switch
Table 3-67 Networking switch description
Name
Button pressing
Button pressing
Button holding down
Default Button
Table 3-68 Default button description
Name
Default button
Issue 07 (2020-03-16)
Meaning Status
Off
Power indicator Steady on
 If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.
 If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
 Blinking intermittently at super short intervals means an indicator blinks at super short intervals for
0.5s and then remains off for 0.5s.
Definition
Press the button for
less than 1s.
Press and hold the
button for more than
1s but less than 5s.
Press and hold the
button for more than
10s but less than 20s.
Definition
Hold down the button
for more than 10
seconds.
Copyright © Huawei Technologies Co., Ltd.
Description
The actual number of
online devices equals the
value of BIM number.
Board power indicator.
Function
CIM blinking function
Creates a network if no network has
been created. Switches between network
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
BIMs).
Function
Reset to the default IP address
(192.168.0.10)
3 Device Description
Measure
Requires no
handling.
Requires no
handling.
73