Replacing Ecc800 Antennas - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 8-3 Replacing a PSU
----End

8.3.3 Replacing ECC800 Antennas

Prerequisites


Procedure
Step 1 Remove the 2.4G and 3G antenna cables connected to the ports on the ECC800, as shown in
Figure
Figure 8-4 Removing antennas
Step 2 Install the spare 2.4G antenna and 3G antenna in the original positions and connect them to
the ECC800.
----End
Issue 07 (2020-03-16)
Tools: ESD wrist strap, ESD gloves
Materials: Spare ECC800 antennas of the same model are available and functional.
8-4.
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance
184