Third-Party Nms Management (Over Snmp); Connecting The Communications Cable - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 7-4 Page for managing transparent transmission channels


----End

7.2 Third-party NMS Management (over SNMP)

7.2.1 Connecting the Communications Cable

Procedure
Step 1 Connect the communications cable to the WAN_1 port on the ECC800.
Figure 7-5 Connecting the communications cable
----End
Issue 07 (2020-03-16)
If Connection mode is set to Compatible, click Confirm.
On the ECC800 WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm password
that has been set on the ECC800 WebUI, and click Confirm.
Copyright © Huawei Technologies Co., Ltd.
7 Remote Management
175