How Can I Rectify Camera Access Restriction; How Should I Add The Devices Accessed Through A Smart Eth Gateway Over Modbus-Tcp To The Ecc800 Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
----End

9.1.18 How Can I Rectify Camera Access Restriction?

Prerequisites
If Huawei S12700 series switch is used, refer to this section to rectify the fault. For more
information, consult network engineers.
Context
The camera is inaccessible after the MAC address and IP address are bound in network
configuration.
Procedure
Step 1 Use the free-rule configuration method. Configure the free-rule MAC address so that users
can access the network without authentication. For the configuration method, see the section
authentication free-rule in
----End
9.1.19 How Should I Add the Devices Accessed Through a Smart
ETH Gateway over Modbus-TCP to the ECC800 WebUI?
Prerequisites
The device supports DHCP.
Context
Figure 9-3 Network diagram
Issue 07 (2020-03-16)
S12700 V200R008C00 Product
Copyright © Huawei Technologies Co., Ltd.
Documentation.
9 FAQ
198