Huawei ECC800 User Manual page 49

ECC800 Data Center Controller
User Manual
Electronic cabinet lock
Features:





Figure 3-16 Electronic cabinet lock
Table 3-31 Cabinet electronic lock specifications
Item
Rated input voltage
Rated current
Unlock mode
Card type supported
Mechanically unlock
Mechanical Code Lock
Features:





Issue 07 (2020-03-16)
An IC card can be used after being authorized using software.
An IC card can be authorized for one lock or all locks.
Door opening information is recorded through a network.
The system displays the status of cabinet doors and locks in real time, the system
displays the status of cabinet doors and locks in real time and reports the unauthorized
door opening.
The system supports remote unlocking.
The cabinet door can be opened with only the key and without the password.
The cabinet door can be opened with only the password and without the key.
The user can set a password.
A password should contain at least three digits.
The password can be reset if the user forgot it.
Copyright © Huawei Technologies Co., Ltd.
Specifications
12 V DC
200–300 mA
Power on to unlock
IC card
Supported
3 Device Description
40