Table of Contents
Advertisement
3.16 Alarm section
The second section, named Alarm, allows the user to set which alarm
should be notified, if through FTP connection or SMS to the user mobile
phone.
The same windows allows the user to set which average type should be
performed on the acquired data, AVG or RMS, and the averaging period
over which the average calculation is performed.
In the above example average type is AVG over 6 minutes time period.
Both Warning and Alarm thresholds are set to be notified by an SMS to the
user's mobile phone (telephone number should be set through an SMS sent
to the station or, during RS232 or USB or Ethernet connection, through the
Point-to-point section).
8061SW-02 - User's guide and Data Display
3-49
Advertisement
Table of Contents
