L3Harris NARDA AMS-8061 User Manual page 205

Area monitor selective
Table of Contents

Advertisement

The figure named Charge is shown as follows:
D07
Charge
Byte 7
This value represents the charging current of the AMS-8061 battery. The number should be considered
as an unsigned 8 bit integer.
To get the value in CH_Units the following formula should be used:
CH_Units)= Charge * 0.78
If, for example, the 8 bit figure named Charge is 0x57 (decimal 87) then the CH_Units would be ~68
The figure named RH is shown as follows:
D07
RH
Byte 8
This value is the relative Humidity and is expressed in percent . The number should be considered as an
unsigned 8 bit integer.
If, for example, 8 bit figure named RH is 0x32 (decimal 50) then the value of RH would be 50%
The figure named Battery is shown as follows:
D07
Battery
Byte 9
It is the voltage of the AMS-8061 battery. The number should be considered as an unsigned 8 bit
integer. To get the correct value of the battery voltage the following formula is used: Volt = Voltage *
0.133
If, for example, 8 bit figure named Battery is 0x5D (decimal 93) then the battery voltage will be ~12.37
V
D06
D05
8 bit unsigned integer
D06
D05
8 bit unsigned integer
D06
D05
8 bit unsigned integer
D04
D03
D04
D03
(RH)
D04
D03
(Voltage)
SMS Messages and Commands
D02
D01
D02
D01
D02
D01
5-37
D00
D00
D00

Advertisement

Table of Contents
loading

Table of Contents