Table of Contents
Advertisement
2.1 Introduction
2.2 Initial inspection
2.3 Working environment The working conditions for the instrument are as follows:
2.4 Return for repairs
Document AMS8061EN-10112-1.29 - © NARDA 2021
2 – AMS-8061 Installation and first use
with NardaAMConfigurator
This section provides the information necessary to install and use the AMS-
8061 Field Monitoring System.
It also includes information regarding initial inspection, power requirements,
interconnections, working environment, assembly, cleaning, storage and
shipment.
Inspect the package for any possible damage.
If the packaging or protective material are damaged, check that the
content is complete and that the instrument has not been damaged in
any of its electrical or mechanical parts. Check the accessories,
referring to the checklist enclosed with the manual. Report any
noticed damage to the forwarder and to NARDA.
• Temperature
• Relative humidity
The instrument should be stored in a clean, dry place free of acids, dust
and moisture.
The storage environment must have the following specifications:
• Temperature
• Relative humidity
•
Altitude
Any part of the instrument – with the sole exception of the air filters (see
Service at chapter 7) - can only be replaced by NARDA, therefore, in case
of damage to parts and/or malfunctions, contact the NARDA service center.
When the instrument has to be returned to NARDA for repairs, please
complete the form included in this User's Manual, filling in all the
information necessary for the service requested.
To reduce the time necessary for the repair, be as specific as possible in
describing the malfunction. If the problem only occurs under specific
conditions, detail in the best possible way how to reproduce these
conditions.
Whenever possible, it is preferable to use the original packing for return,
making sure to wrap the device in heavy paper or plastic (see section 6 for
detailed packaging instructions). In alternative, pack the equipment in a
sturdy cardbox with plenty of impact absorbing material all around the
equipment, to ensure a tight fit and prevent it from moving inside the box.
Take special precautions to protect the solar cells and GSM modem
antenna. Seal the package securely and write FRAGILE on the outside to
encourage careful handling.
Nowadays there are restrictions on the shipment of hazardous
materials, eg. some types of lithium batteries.
Please, check the proper, safe, shipping mode, with the help of your
courier, in the case the product is equipped with batteries.
From -10°C to +55°C
≤ 95%
From -20°C to + 70°C
< 99%
Up to 4000 m (a.s.l.)
Installation and use
2-1
Advertisement
Table of Contents
