Table of Contents
Advertisement
4.2.2 Modem,
This modality allows you to directly communicate with area monitor. All you
point to point
need is a PC modem, a SIM card in the area monitor modem and another
SIM car for the PC modem but only if it is GSM. Beware, the SIM card for
this way of communication need to be specifically enabled for CSD
communication mode. This kind of specific SIM card is normally called
M2M Machine to Machine.
Make sure the PIN code of the SIM card in use has been removed.
Fig. 4-6 Modem, Point to Point
To work in this way the area monitor has to be set in this way:
These are the basic operations to follow to work with the AMS-8061.
All additional information and explanations can be found on chapter 3
Fig. 4-7 ""Modem, Point to Point" settings
Schedule: Point to Point,
All other field can be left blank
Press SET
Now switch the main panel of the software into Point to Point mode and add
a new station. It always better add and remove stations instead of change
an existing one.
Point to Point and FTP Communication
4-9
Advertisement
Table of Contents
