Table of Contents
Advertisement
8) Click the button Data transfer settings:
A new form opens:
Use the Read button to display the parameters of a station connected via
RS232, USB or Ethernet cable.
4.5.1 Modem, FTP
9) Set the station in FTP mode.
In FTP mode, the area monitor will send all data to an FTP server where
they lie up. All you need is a PC modem, a SIM card in the area monitor
modem and another SIM card for the PC modem but only if it is GSM.
Beware, the SIM card for this way of communication is a standard SIM card
with an internet subscription activated. Make sure the PIN code of the SIM
card in use has been removed
Fig. 4-8 Modem, FTP
To work in this way the area monitor has to be set in this way:
4-26
Point to Point and FTP Communication
Advertisement
Table of Contents
