Table of Contents
Advertisement
The frame, Schedule for SMS, allows the user to set in the same way a
second time period for the modem to be ON. This is not for FTP
connections but it is provided to manage a stand-by period for SMS
information exchange
The frame Schedule for SMS works in the following way:
- in the part Time, you have to decide when the modem has to be switched
ON and able to receive calls and SMS query and setting commands.
- in the part Stand By, you have to decide for how many quarters of hours,
starting from the hours of switching ON, the modem has to stay in stand by
- in the part Every, you have to decide the interval, expressed in hours, from
every switching ON.
Example:
In the picture the modem will be switched ON at 16:00 and it will try to send
all data to your FTP server for 1 quarters of hours.
This operation is repeated every 24 hours for a total of 1 connections every
day at 16:00 o'clock
If the command Send Report is checked, an SMS informing about
maximum field strength measured and lowest battery voltage of the day is
sent to the user mobile phone (telephone number to be set by SMS to the
station or direct local connection during preliminary installation and test).
8061SW-02 - User's guide and Data Display
3-51
Advertisement
Table of Contents
