Table of Contents
Advertisement
Command
Description
Internal temperature and Relative Humidity
?TMP
query command.
It returns the internal temperature in °C
and the RH % in the format:
TMP=TT,RH.
Ethernet programming time setting query
?TSE
command.
Answer returns information (as set by the
STSE command) with the following format:
TSE=ON|OFF HH:mm each XXh
HH:mm is the time when the LAN port
switches on
XXh is the repetition interval in hours
Modem programming time setting query
?TSM
command.
Answer returns information (as set by the
STSM command) with the following format:
TSM=ON|OFF|NET HH:mm ( Xq) each
YYh (DIS)
Where:
HH:mm is the time when the Modem
switches on
(Xq) is the stand-by time, in quarters of
hour (maximum 24, that is to say 6 hours)
YYh is the repetition interval in hours
(DIS) string informs that the disable
command is active (please look at SDMO
setting command). When the string is not
shown, the modem schedule works as
expected.
Example
Example: #SM?TMP*
Response: TMP=39.08,30.4
Which means that the internal
Temperature is 39.08°C and the RH is
30.4%
Example: #SM?TSE*
Response:
TSE=OFF 00:00 each 00h
It means that the LAN port is set to be
always OFF.
Example: #SM?TSM*
Response:
TSM=NET 12:15 ( 4q) each 01h
It means that the modem is scheduled
to be switched on at 12:15 and remain
on for 4/4 of hour, every hour (that is to
say to be permanently on).
SMS Messages and Commands
5-13
Advertisement
Table of Contents
