Table of Contents
Advertisement
3.12.8 GSM Off on Exit
3.12.9 Device Password
3.13 General Commands
3.13.1 Read Station Conf. To read the status of the monitoring station, select Read Station Conf.
3.13.2 Enable Setting
3.13.3 Hang & Exit
•
The option GSM OFF on Exit sends to the field monitor the request to
switch off the station modem in advance, in addition to the request to
end the connection. When this option is enabled, at the end of the link
(not made after a line break and not after the maximum time without
dialogue) the station switches its internal modem off after a time
ranging from 1 to 2 minutes, regardless of the residual time set, in
order not to waste energy.
•
Device Password to edit the identification password saved on the
station.
The device password shall be composed by a number alphanumeric
characters from 1 to 32.
Uppercase and lowercase are considered different characters.
Four general commands are located at the bottom of the main window:
- Read Station Conf
- Enable Setting
- Hang & Exit
- Sub Bands
Click on the button to start a new query of the station.
This command is similar to RECALL but does not download any data
To enable settings on the monitoring station, click on the Enable Setting
button.
The software will ask to enter the Setting password:
The Hang & Exit button ends the ongoing communication with the
monitoring station and returns to the main window.
8061SW-02 - User's guide and Data Display
3-43
Advertisement
Table of Contents
