Table of Contents
Advertisement
Select the button FTP in the frame Schedule if not already selected.
Fill the same parameters, Address, User Name and Password for the FTP
server. These parameters will be transferred to the station and will be used
by the station itself to access the ftp server for downloading measurement
results and upload any new configuration file.
In this example, parameters for the Narda STS ftp server are set for
preliminary testing.
User should then set access parameters for his own ftp server.
Fig. 4-9 "FTP mode" settings
FTP:
- Address: the static IP of the FTP server you intend to use
- User Name: the user name to enter in the FTP server
- Password. the password to enter in the FTP server
Mobile operator: these parameters depending on the service provider of
the used SIM.
- Provider: the APN (Access Point Name)
- User name: user name used for GPRS connection
- Password: password used for GPRS connection
Press SET and then Exit
Point to Point and FTP Communication
4-27
Advertisement
Table of Contents
