Table of Contents
Advertisement
3.9 Post settings
The Post Settings key is used to open a window where settings can be
defined for the selected station.
This presetting operation allows to change the settings even if the station
cannot be contacted at the specific moment, for any reason. All the settings
are saved temporarily and sent to the station during the first link.
The pre-setting window shows the status of the station as it was during the
last link or just after the latest modification of the parameters. Every change
is saved in the order made, regardless of whether it may be redundant or
contrary to the previous one. The command "Remove All Postponed
Settings" cancels every setting saved and ready to be sent at the first
available link. To prevent the data already stored in the memory of the
station become meaningless because a change of settings, the presetting
commands are sent to the station only immediately before the hang-up
command.
8061SW-02 - User's guide and Data Display
3-25
Advertisement
Table of Contents
