Table of Contents
Advertisement
Command
Description
Request User, Password e IP address hidden
?HFTP
status (FTP mode) on the RS232 port sniffer.
0FF: User, Password e IP address are shown on
RS232 sniffer.
ON: User, Password e IP address are hidden on
RS232 sniffer.
In FTP communication mode the command and
feedback response are replaced by "@@@". This
status also affects ?GPR3, ?GPR4, ?GPR5,
?GPR7 and ?GPRA commands.
Identifier request with password authentication.
?IDN
The answer displays the Station identifier (that can
be set by the SIDN command) followed by the
serial number (factory preset).
It is always necessary to send this command,
before any other one, when a password is set in
the remote Station and any wireless connection is
used.
Via SMS, it is advisable to send this message,
instead
authentication.
Please look at the SPSW command to find
information about how to save the password in the
Station.
5-8
SMS Messages and Commands
of
?IDNF,
to
make
Example
Example: #SM?HFTP*
Response:
SM HFTP=OFF*
Another example: #SM?HFTP*
Response:
#SM HFTP=ON*
Example: #SM?IDN*
Response:
IDN=democisano;000WX50802;
Another Example: #SM?IDN
PASSWORD* #SM?BAT*
Response:
IDN=democisano;000WX50802;
BAT=13.07
the
password
The reply to an incorrect password
is: DENIED
Advertisement
Table of Contents
