Table of Contents
Advertisement
During the download of the data from the station a window is displayed
with two bars indicating the progress of the download.
The vertical bar gives the percentage of the total amount of data to be
downloaded while the horizontal shows the progress of the download for
each subsequence six hours interval.
During data download in Point to Point mode, mainly due to poor reception or
to poor quality of the GSM signal, some error messages may be received.
In these cases, repeat the RECALL command.
Use the Set Clock command to update or change the internal clock in the
3.12.6 Station Date &
station and synchronize it with the time set in the PC.
Time
The operation will be carried out automatically after every connection if the
Synchronize on exiting option is enabled.
The internal clock of the station is extremely accurate and in many
cases much more accurate than the clock on the PC. The internal
clock is not automatically updated to summer time and/or to standard
winter time.
When the internal clock of the station is changed, some readings may
no longer appear contiguous and gaps may be found.
For this reason NARDA recommend to use of this function sparingly
8061SW-02 - User's guide and Data Display
3-41
Advertisement
Table of Contents
