Table of Contents
Advertisement
If the 8061SW-02 software does not see any available port on the PC
where it is installed, the following message appears:
See paragraph 4.2
If a COM port is configured in a way that makes it not available on the
computer or if there are no free ports, you can run the software in DEMO
MODE to read the data already downloaded.
If the station is switched off, the serial communication cannot take place
and the error message is:
Answer NO and try to solve the problem checking the conditions of the
cable and if it has been connected to the port used by the 8061SW-02
software.
If the answer is YES, the following message appears:
Confirm with OK and the following message appears
Confirm with OK. The software will show the existing communication at the
time of the latest data download.
7-10
Troubleshooting
Advertisement
Table of Contents
