L3Harris NARDA AMS-8061 User Manual page 80

Area monitor selective
Table of Contents

Advertisement

3-30
8061SW-02 - User's guide and Data Display
GPS to show the position data;
The AMS-8061 has a built-in GPS which allows tracking its position.
Data is reported in a NMEA RMC sentence according to NMEA 0183
ver 3.01. As for example, the Latitude in the picture corresponds to 44°
04' 29" when indicated in degrees, minutes and seconds
The GPS position can be quiried at any time via direct connection or
sending SMS (see Schedule for SMS) or by command protocol.
In addition whenever the modem station is switched on at schedule time
(see Schedule for Modem), the GPS get the position.
Station Date & Time with subcommand:
-
Set Clock, to transfer the current date of the PC to the station
-
Synchronize on exiting, to make the above function (updating time
and date at the end of every link) automatic.
It is recommended to check the station clock before starting any new
monitoring campaign.
Be sure to download any useful data before clock setting as
previously acquired field data will be no more downloadable.

Advertisement

Table of Contents
loading

Table of Contents