Table of Contents
Advertisement
3.25 Secondary
Commands
3.25.1 Save Files
3-62
8061SW-02 - User's guide and Data Display
Description of command bar:
Used to save files of measurements in the following formats:
1. Draft (Diagram) (*.RS9) (Default) Archive for future processing of
readings;
2. Panel (*.P87) A file with the extension *.P87 is saved, containing the
current settings selected with the Setup key, so that the operator can
readily restore the preferred settings at a later date. (Normally the
program starts with the setting in the file default.P87)
3. BitMap (*.BMP) A graphic bitmap file is saved which is identical to the
diagram displayed on the screen at the time of the request.
4. ASCII (*.TXT) A text file is saved containing the data of the
configuration, saved with the function Save Export File Setup.
The screen looks like this:
Measurements can be saved in any directories. During this procedure the
software shows a list of the previously saved files.
Advertisement
Table of Contents
