Table of Contents
Advertisement
3.12.5 Get DATA
3-40
8061SW-02 - User's guide and Data Display
Downloading data from the monitoring station to the PC.
The data in the internal memory of the station can be downloaded after
defining a Start and Stop event as follows:
The Start and Stop of the data download is done between the following
commands, in any combination.
•
Since Last Time: Automatically enters the time and date of the latest
download;
•
Date & Time: any date and time indicated;
•
Up to NOW: actual date and time with reference to the station;
The "Recall" command starts downloading results to the controller PC.
The data downloaded will be assigned automatically to the relevant days of
the calendar and those days will be marked with blue characters.
The Start event must be earlier than the Stop event otherwise an error
message will be displayed, as follows:
If the download period is longer than that allowed by the memory
available at the rate defined, the following message will appear:
After downloading the data, click Hang & Exit to view the data
downloaded
Advertisement
Table of Contents
