Table of Contents
Advertisement
Run 8061SW-02 and the main window appears as follows. The
-
software ask you to enter a Terminal and Setting password (see
§3.4.1, §3.4.1.1, §3.4.2, §3.4.2.1).
Double click the first station listed in the FTP station list (new software
-
installations show the "New8061FTP" station, on the list, as an
example).
A new area monitor must be added to the list as follow (all field are
necessary).
Insert the Station Identifier: it is the name you decide to give to your
-
monitor station.
Insert the Serial Number of the station.
-
Insert the Address, User Name and Password: these parameters are
-
of our FTP server for preliminary test. Beware that our FTP server is
periodically cleaned, do not use it in a definitive way.
For every field the computer will request the Terminal Password (see
§3.4.1 and §3.4.1.1).
Click the button "Data transfer settings".
-
Point to Point and FTP Communication
4-5
Advertisement
Table of Contents
