Table of Contents
Advertisement
11) Accessing the FTP server
Be sure a full internet connection is available for the controller PC. The
firewall, if active, should not close ports 20 and 21 usually used for ftp
communication (the executable is called DRIVERIN.exe)
From the 8061SW-02 main window, select the FTP label, your FTP stations
list will be shown
These are the basic operations to follow to work with the AMS-8061.
All 8061SW-02 additional information and explanations can be found
on chapter 3 (see §3.15, §3.16, §3.17, §3.18 and §3.19).
Enable or disable the "Do not move file" function
Select your station and hit Open to access the ftp server.
At the first connection, the software will advise you that there is no folder on
FTP server with that serial number. The following message will appear:
The station folder, into the ftp server, has not been created yet, answer Yes
to create it.
Point to Point and FTP Communication
4-33
Advertisement
Table of Contents
