Table of Contents
Advertisement
3.4.3 Entering the
DEVICE password
3.4.3.1 Changing the
DEVICE password
Remote communication in Point-to-point mode is protected by a Device
Password that is stored in every AMS-8061 Area Monitor; all the
monitoring stations are initialized in the factory with the password
"PASSPMM" that is advisable to replace during the first connection
following these steps:
In Point-to-point communication mode, enter "PASSPMM" in the Device
Password field in the station list provided by the control software.
Press the CALL button to establish the communication. The match between
the Device Password memorized in the PC and the one memorized in the
station is checked. If they do not match, the communication is not allowed.
Once a link has been successfully established, the control window is opened
and it is possible to change the Device Password memorized in the station
with Enable Change button.
Once the device password has been successfully changed, the same
password must be also entered in the station list provided by the control
software to allow future communication.
Device passwords are not checked during local RS232 or USB or
Ethernet communication.
8061SW-02 - User's guide and Data Display
3-13
Advertisement
Table of Contents
