Table of Contents
Advertisement
6 –
Action of the wind on the AMS-8061
This section provides the information necessary to install and use the Area
6.1 Introduction
Monitor Selective AMS-8061 in the presence of wind.
The Field Monitor is usually installed outdoors where the strong winds can
endanger its stability that depends on the weight and eventual ballast bags
or nylon wind strays.
It is necessary to calculate the speed and pressure of the wind in the
place of installation; through the table 6-1 it is possible to determine if
it is necessary to use the ballast bags with their full weight or to
fasten the nylon wind strays
Fig. 6-1 AMS-8061 Field Monitoring System
Document AMS8061EN-10112-1.29 - © NARDA 2021
Action of the wind on the AMS-8061
6-1
Advertisement
Table of Contents
