Since the station is set to FTP communication mode, some parameters
could be not available for modification, if their prevalent meaning is
designed for Point-to-point mode.
If, for example, the User wishes to preset the Schedule for MODEM, that is
to say the time plan for ftp data download, it is possible to temporary set the
station to Point-to-point communication mode (in the Data transfer settings
window)
Then, connect the station in the Point-to-point section, as already
explained, and set all the desired paremeters.
After that, go back to the Data transfer settings window, and restore the
final FTP mode in the Schedule frame.
From now on the station is ready to work as desired, with all the
parameters set before of its first FTP connection.
4-32
Point to Point and FTP Communication