Table of Contents
Advertisement
33) Remove the screws from the receiver baseplate to allow the Radome
2.15 Radome
mounting.
Considering that the AMS-8061 has been designed for outdoor use and
the main operations are generally performed remotely by means of an
internal GSM modem, the station does not have any control or
connection on the outside of the protective case.
Controls and connections are available inside the protective case as
listed onward in this manual and can be reached by removing the
station Radome or the power pack cover.
A micro switch on the side of the main unit is tripped when the radome is
opened. It is possible to activate an alarm, sent by AMS-8061 to any GSM
mobile phone, warning of any attempts to tamper with the device.
The anti-tampering switch protrudes from the main unit.
Insert or remove along its axis the protective case; to avoid damage the
interlock do not turn the radome of the monitoring station when closing
or opening.
Place the Radome to align the hole near the inner label to the corresponding
one in the receiver baseplate
2-30
Installation and use
Advertisement
Table of Contents
