Table of Contents
Advertisement
Once set the GSM modem you can disconnect the station from the
computer and put it in the place choose for monitoring.
Connect the modem to the computer to start working in "Modem, Point to
Point" mode with the area monitor.
Remember that the modem needs to work with a baud-rate of 115200.
Click twice on the 8061SW-02 icon to start the software. First a window
appears displaying the software release, the port COM assigned and the
presence and the status of the modem will be checked.
In case a modem is detected, the message MODEM OK will appear.
4-16
Point to Point and FTP Communication
Advertisement
Table of Contents
