Table of Contents
Advertisement
3.12.7 Firmware update
Update of internal Firmware
It is important to update the station firmware in order to use all the new
functions added and eliminate any bugs in the software.
To update the firmware, use the Execute command.
The monitoring station will place the old firmware in its memory and will try
to load a new one. A window with a coloured progress bar appears on the
screen to indicate the firmware loading in progress.
The following steps will be carried out:
1) Request to confirm
transfer
2) Firmware transfer in
progress indicated by
the progress bar
3) Back-up writing
(Internal copy of FW)
4) Reset and automatic
startup of station with
new version of firmware
If any errors occur, or if there is a poor signal connection, or if for any
reasons the new firmware is not completely and successfully transferred to
the monitoring station, the station will automatically restore the old firmware
in order to prevent malfunctions or stops.
It is also possible to update the firmware by connecting the PC to the
station.
3-42
8061SW-02 - User's guide and Data Display
Advertisement
Table of Contents
