Table of Contents
Advertisement
4-6
Point to Point and FTP Communication
The Data transfer settings window allows to set stations for FTP or
-
Point-to-point
Schedule: Here you have to set if the area monitor has to work in Point to Point or
FTP mode.
FTP: These parameters depending on the FTP server you are using. As default,
every Narda area monitor is set to work in FTP mode and the parameters you can
find in this section are of our FTP server that can be used for preliminary test.
Beware that our FTP server is periodically cleaned do not use it in a definitive way.
Mobile operator: These parameters depending on the service provider of the used
SIM.
Provider is the APN (Access Point Name)
User name used for GPRS connection
Password used for GPRS connection
Some examples:
Italy: APN for a Vodafone SIM card is: web.omnitel.it
User name and password are not required.
Greece: APN for a Cosmote SIM card is: internet
User name and password are not required.
Click the "Read" button and type the Terminal password when
-
requested.
The "Read" buttons queries the station connected by RS232 or USB
and displays, in the "Schedule" frame, which communication mode is
enabled.
The above picture shows a station set for FTP communication mode.
To set the station to the Point-to-point mode select "Point to Point" in
-
the "Schedule" frame, click the "Set" button and type the Terminal
password when requested.
The "Read" button to check that the Point to Point mode has been
-
correctly enabled in the station connected to the controller PC.
Now choose in which way to use the station: "RS232/USB, Point to
-
Point " (see §4.2.1) or "Modem, Point to Point" (see §4.2.4)
Advertisement
Table of Contents
