Table of Contents
Advertisement
3.2 Hardware
Requirements
3-2
8061SW-02 - User's guide and Data Display
To ensure the proper operations of the 8061SW-02 software, the minimum
hardware requirements of the Personal Computer are:
•
Pentium processor or equivalent;
•
at least 256 Mb RAM;
•
at least 100 Mb of free space on your hard disk;
•
minimum display resolution 1024x768 (the Windows
appearance setting is recommended. Depending on the operating
system in use, some customized screen appearance could cause
abnormal displaying of the control software);
•
GSM or line modem (for Point-to-point data communication);
•
Full Internet access allowed for FTP (for FTP communication);
•
Free USB or RS232 or Ethernet port;
•
Operating System: Windows™ Win7, Win8.1, Win10.
8061SW-02 control software has been developed to operate properly
with different Date /Time formats that can be selected through the
Regional Settings of the Windows Control Panel.
Not all the possible combinations has been tested.
A functional test by setting European format (dd/MM/yyyy ,
HH:mm:ss) is suggested in case a malfunction is noticed.
PC modem can be either internal or external, line modem or GSM. It must
support the data transmission protocol.
If a GSM modem with SIM Card is used, it must allow to receive and
transmit data, not only on fixed phone numbers but also to and from
cellular phones. GSM 9600b/s C.S.D. data communication mode is
required, check with the Telephone Service Provider to make sure this
additional service is available.
For proper installation of the modem, refer to the instructions of its
manufacturer.
™
default screen
Advertisement
Table of Contents
