Table of Contents
Advertisement
Hit the button Call, on the right, to access the station connected by cable.
As the Point-to-point mode normally operates through a modem, a
message will inform that no modem has been detected on your COM port.
It will ask whether you wish to access a station connected by cable. Being
this the case, you will answer Yes to access your station through the Serial
RS232, USB or Ethernet cable:
The station name is always stored within the station and it is expected that
it matches the name, in your station list, that have been selected before
calling.
The user station have not been added to the Point-to-point stations list as
the FTP communication mode has been decided, in advance, for this
station.
Answer No to the next messages as you neither wish to change the station
name, nor add in the Point-to-point station list the station you are using:
Answer No as you do not wish to change the name stored within your
station.
Answer No as you do not need to add this station to the Point-to-point
stations list, you are going to use it in FTP mode. This station is in your FTP
stations list.
Point to Point and FTP Communication
4-29
Advertisement
Table of Contents
