Slot For The Sim Card - L3Harris NARDA AMS-8061 User Manual

Area monitor selective
Table of Contents

Advertisement

25) AMS-8061 is equipped with a 4G GSM modem (inside the main unit)
2.7 GSM Modem and
and antenna that allows remote communication for programming and for
SIM Card
the remote collection of the data recorded. The GSM modem requires a
regular SIM Card (not provided) enabled for data communication (Point to
Point, GPRS/FTP or both, depending on the preferred communication
mode).
Insert the SIM card in its tray in the GSM modem of the unit or be sure that
the tray is locked inside its slot even if the GSM is not being used. To
extract it press the yellow button just beside the SIM tray
The SIM to be used must permit the transmission and reception of data
calls
Fig. 2-3 Slot for the SIM card
The user can choose the most suitable SIM Card to install, depending on
the services and costs offered by the different mobile phone Service
Providers; it should also be chosen so as to guarantee optimum coverage
for the specific zone of installation of the field monitor.
To download the measurement data from the monitoring station
through the RS232. USB, Ethernet port, the tray holding the SIM Card
must be correctly fitted inside its slot even if no SIM Card is installed.
Before removing or inserting the SIM Card, switch off the
AMS-8061.
If you use a rechargeable SIM Card, make sure it is charged.
Before using the SIM Card with the AMS-8061, disable the PIN code
using the proper function available on any mobile phone.
2-18
Installation and use

Advertisement

Table of Contents
loading

Table of Contents