Table of Contents
Advertisement
3.6 Station management
3.6.1 Entering a new
station
3-16
8061SW-02 - User's guide and Data Display
To make a call or download data from an existing Field Monitor, it is
necessary to use the Add Station command and add the station to the list.
The screen looks like this:
The procedure to add a station is as follows:
•
Enter the station name (alphanumeric ASCII characters only) on the
Station Identifier (Name) line. This name will be recorded in the station
memory the first time it is queried. It will also appear on the display of
your mobile phone every time the station is queried via SMS or when
that station sends its daily Reports;
•
Enter the Telephone number of the SIM card installed in the station
(SIM cards allowed for CSD data communication are generally provided
with three different numbers: Voice call, Fax, Data. Be sure to type the
number assigned for CSD data communication); the field Telephone
Number must be filled even if the CSD communication mode is not
desired or provided. Type a number string like "0123456789" to
add the new station to the station list.
•
Enter the Device Password identifying the station to allow CSD remote
communication;
•
If necessary, select one of the Automatic Download functions to start
downloading data automatically every time a remote station calls the
controller PC (PC answering) and /or every time the controller PC calls
a remote station (PC calling).
•
Select Auto ASCII File function if you want a data txt file to be
automatically generated after any data download has been completed;
•
In the Scheduled Call field, enter a Time when the PC, if enabled with
the Generate Call function, automatically calls the station in CSD mode.
The first 8 characters of the Station Identifier (Name) must differ from
those of any other stations already entered. If they do not, the
following error message will be displayed:
The Terminal password will be requested for every operation.
Advertisement
Table of Contents
