Table of Contents
Advertisement
Prior to installing stations, make sure that the point at which the field
monitor will be installed is adequately covered by the mobile phone
service allowing remote data communication.
This can be done using any GSM mobile phone capable of indicating
the intensity of the signal coming from the local base radio station of
the company chosen for the SIM card.
For remote communication, it is essential to equip the unit with a SIM
card that must be enabled for the selected data communication
(GPRS/FTP, Point to Point or both).
The antenna used in the AMS-8061 and the receiver input stage
contain highly sensitive elements.
Never place the unit in an electrical field higher than the maximum
allowed level.
If radiated by strong electromagnetic fields, the antenna can be
damaged even if disconnected from the monitoring station, or
connected to a monitoring station that is switched off.
2) Screw the four adjustable feet under the support base.
2-4
Installation and use
Advertisement
Table of Contents
