Table of Contents
Advertisement
3.4 Password
management
3.4.1 Entering
TERMINAL
password
3-8
8061SW-02 - User's guide and Data Display
8061SW-02 allows the user to create a list of all stations that are going to be
used. The list include parameters, like telephone number, station name,
ecc. needed by the software to access every single station. To avoid any
improper modification of parameters included in the station list by non
admitted personnel a Terminal password is needed.
Running the software for the first time after installation the user is allowed to
define the password. The screen looks like this:
If the answer is YES, a window will be opened where it is possible to enter
the Terminal PASSWORD for the management of the Station list
parameters. If the answer is NO, the program will allow to enter the
password later.
Every time you have to modify a field, the Terminal Password will be
requested by the software. At the beginning, for the first setting
operations, it would be helpful to leave these password blank, simply
pressing enter on the keyboard.
Set a password only after all your area monitors will be correctly set,
and just in case you need to have an higher security level.
Advertisement
Table of Contents
