Table of Contents
Advertisement
Setting COMMANDs
Syntax
#SMSALR(parameters)*
#SMSAQ_(parameters)*
#SMSAQP(parameters)*
#SMSATH*
#SMSATH0*
#SMSAVGx*
#SMSBND(parameters)*
#SMSCLD(parameters)*
#SMSCLT(parameters)*
#SMSCNL(parameters)*
#SMSDIC*
#SMSDIE*
#SMSDIG*
#SMSDIR*
#SMSDMO*
#SMSENC*
#SMSENE*
#SMSENR*
#SMSETH*
#SMSGCS (parameters)*
#SMSGOI*
#SMSGOIF*
#SMSHFTP (parameters)*
#SMSIDN(parameters)*
#SMSMSK(parameters)*
#SMSPSW*
#SMSRST*
#SMSRSTR*
#SMSTDM(parameters)*
#SMSTDS(parameters)*
#SMSTSE(parameters)*
#SMSTSM(parameters)*
#SMSTSS(parameters)*
#SMSWRN(parameters)*
Function
Alarm threshold setting.
Acquisition mode setting (alias #SMSAQP)
Alias for SAQ_ command
Hang off current call.
Hang off current call and switches the Modem off.
Average Time for Alarm and Warning
Bands Frequency setting
Clock date setting.
Clock time setting.
Deferred call enabling.
Disable Call.
Disable Ethernet.
Disable GPS
Disable Report.
Disable Modem
Outgoing call enabling.
Enable Ethernet.
Report send enabling.
Ethernet hang up
Set internal clock updating mode
GPS On Immediately
GPS ON Immediately with Feedback
Show or hide User, Password and IP address on the RS232 port sniffer
Station identifier setting.
Alarm mask setting.
New Password setting
Reset to default configuration
Reset to default configuration and rate
Modem phone number setting.
SMS phone number setting.
Time Schedule Ethernet setting.
Time Schedule Modem setting.
Time Schedule SMS setting.
Warning threshold setting.
SMS Messages and Commands
5-3
Advertisement
Table of Contents
